DSS console mode in NEC SV8100

 

windows 11 l2tp with ipsec issue

REG ADD HKLM\SYSTEM\CurrentControlSet\Services\PolicyAgent /v AssumeUDPEncapsulationContextOnSendRule /t REG_DWORD /d 0x2 /f
     REG ADD HKLM\SYSTEM\CurrentControlSet\Services\RasMan\Parameters /v ProhibitIpSec /t REG_DWORD /d 0x0 /f

Windows 11 TPM issues on ESXI

 If you cannot enable vTPM, bypass the check during installation: 

1. When you see the error, press SHIFT + F10 to open the Command Prompt.
2. Type regedit and press Enter.
3. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\Setup.
4. Right-click Setup, select New > Key, and name it LabConfig.
5. Inside LabConfig, create three DWORD (32-bit) values:
   • BypassTPMCheck -> Set to 1
   • BypassSecureBootCheck -> Set to 1
   • BypassCPUCheck -> Set to 1.
6. Close the editor and Command Prompt, then proceed with installation.